View Cart Checkout


To all our valued customers - Last order date will be Thursday 18th 2:30pm for delivery to us Monday 22nd (No guarantee). So we advise to order by Thursday 11th 2:30pm for delivery on Monday 15th to guarantee in stock items will be here before the Xmas break

Signal Converters


Overview


Signal integrity starts with quality measurement and good equipment. However, even with the best equipment signals can be degraded if the equipment is not properly installed or is not protected by signal conditioners. Signal integrity can be greatly impacted by poor shielding and wiring practices. The biggest factor is ground loop errors (ground noise). Our signal conditioner products protect your expensive electronic equipment against ground loops with up to 1500 V of isolation.

Isolation is one way to eliminate ground loop errors caused by ground noise and other such problems. Isolation means using one of many electronic methods to interrupt the connections between two grounds while passing the correct signal with little or no loss of accuracy. Without a way for ground currents to flow, these currents can't induce signal errors.

FC series signal conditioners are theperfect solution for converting process, temperature and other electrical signals into voltage or current signals for transmission or input to a PLC. FC series signal conditioners offer 1500v isolation between the input and output to help eliminate electrical noise. Features include easily accessible potentiometer adjustment of the output span and offset, (with the exception of FC-33), slim DIN-rail or side-mount cases and removable terminal blocks. FC series signal conditioners are ideal for use with PLCs, loop controllers, digital displays and any other applications requiring an isolated or analogue signal.

 4-20mA to 4-20mA Isolated Loop-Powered Signal Conditioner FC-11 4-20mA to 4-20mA Isolated Loop-Powered Signal Conditioner
Loop powered 4-20 mA input/output signal with 1500vDC isolation between input and output.
• 1500v isolation • Loop powered


Data Sheet
Price (Ex VAT): 81.19 / 101.42
(4-8 working day delivery)

Quantity:  

 0-5/10v, 0/4-20mA Input/Output Isolated Signal Conditioner FC-33 0-5/10v, 0/4-20mA Input/Output Isolated Signal Conditioner
Field configurable input and output ranges of 0-5v, 0-10v, 0-20mA and 4-20 mA with 1500vDC isolation between input, output, and 24 volt 17 supply. LED indicates normal operation and is used inconjunction with the calibration pushbutton for automatic internal calibration.
• 3-way 1500v isolation • Push button calibration


Data Sheet
Price (Ex VAT): 108.23 / 135.20
(Stocked in UK, 4-8 working days delivery if out of stock)

Quantity:  

SIG COND & ISOLATOR BIPOLAR IN /UNIPOLAR OUT 35mm DINFC-B34 SIG COND & ISOLATOR BIPOLAR IN /UNIPOLAR OUT 35mm DIN

Signal conditioner and isolator with field configurable input and output, bipolar input ranges of +/-100mV, +/-50mV, +/-5V, +/-10V, or +/-15V; unipolar output ranges of 0-5V, 0-10V, 0-20 mA or 4-20 mA; input can be field calibrated with offset and span adjustments. Slim-line plastic housing with integral 35mm DIN rail mounting adapter, LED indication and removable screw terminals, 24VDC supply voltage. UL 508 listed, CE marked.

Price (Ex VAT): 116.27 / 145.24
(4-8 working day delivery)

Quantity:  

SIG COND & ISOLATOR UNIPOLAR IN /BIPOLAR OUT 35mm DINFC-35B SIG COND & ISOLATOR UNIPOLAR IN /BIPOLAR OUT 35mm DIN

Signal conditioner and isolator with field configurable input and output, unipolar input ranges of 0-5V, 0-10V, 0-20 mA, or 4-20 mA; bipolar output ranges of +/-100mV, +/-50mV, +/-5V, +/-10V, or +/-15V; input can be field calibrated with offset and span adjustments. Slim-line plastic housing with integral 35mm DIN rail mounting adapter, LED indication and removable screw terminals, 24VDC supply voltage. UL 508 listed, CE marked.

Price (Ex VAT): 116.27 / 145.24
(4-8 working day delivery)

Quantity:  

SIG COND & ISOLATOR W/POT IN / ANALOGOUT 35mm DINFC-P3 SIG COND & ISOLATOR W/POT IN / ANALOGOUT 35mm DIN

Signal conditioner and isolator with field configurable input and output, input ranges of 0 to 100 ohms through 0 to 100 kilohms (3-wire potentiometer); analog output ranges of 0-5V, 0-10V, 0-20 mA or 4-20 mA; input can be field calibrated to 10% of full range of potentiometer. Slim-line plastic housing with integral 35mm DIN rail mounting adapter, LED indication and removable screw terminals, 24 VAC/DC supply voltage. UL 508 listed, CE marked.

Price (Ex VAT): 103.67 / 129.50
(4-8 working day delivery)

Quantity:  

 Thermocouple/mV to 4-20mA, isolated Signal Conditioner FC-T1 Thermocouple/mV to 4-20mA, isolated Signal Conditioner
Field configurable inputs include Type J, K, E, R, S, T, B, N, C thermocouple or mV, with 1500vDC isolation between input and output. Cold junction compensation and burnout detection.Alarm/run LED.
• 1500v isolation • Cold junction compensation (CJC)
• Internal diagnostics (burnout detection or calibration errors)


Data Sheet
Price (Ex VAT): 108.21 / 135.18
(4-8 working day delivery)

Quantity:  

 RTD to 4-20mA Loop-powered Isolated Signal Conditioner FC-R1 RTD to 4-20mA Loop-powered Isolated Signal Conditioner
Loop powered, non-isolated, 3-wire unit converts an RTD input to a linear 4-20 mA signal. User selectable CU10, PT100 or PT1000 input.

Data Sheet
Price (Ex VAT): 108.20 / 135.16
(4-8 working day delivery)

Quantity:  

 Signal conditioner and isolator, IN: mA, V, T/C, RTD, POT - OUT: mA, V884114 Signal conditioner and isolator, IN: mA, V, T/C, RTD, POT - OUT: mA, V
Signal conditioner and isolator, single input accepts milliamps, volts, RTD, thermocouple or potentiometer; single analogue output supports 16 selectable signal ranges. Universal supply voltage 21.6 - 253 VAC / 19.2 - 300 VDC; plastic slim-line housing, integral 35 mm DIN rail mounting adapter, removable screw terminals. Detachable 884501 programming/display module (purchased separately) is required for unit configuration; module may remain affixed for operational display of input and output values. UL 508 listed and CE marked.
Data Sheet
Price (Ex VAT): 166.72 / 208.27
(4-8 working day delivery)

Quantity:  


Related products:
1. Detachable Programming/Display Module for 884114 and 884116 signal conditioners (Ref: 884501)

 Signal conditioner and isolator, IN: mA, V, T/C, RTD, POT - OUT: mA, V plus Relay884116 Signal conditioner and isolator, IN: mA, V, T/C, RTD, POT - OUT: mA, V plus Relay
Signal conditioner and isolator, single input accepts milliamps, volts, RTD, thermocouple or potentiometer, single analog output supports 16 selectable signal ranges, two programmable Form A 19 outputs; universal supply voltage 21.6 - 253 VAC / 19.2 - 300 VDC; plastic slim-line housing, integral 35 mm DIN rail mounting adapter, removable screw terminals. Detachable 884501 programming/display module (purchased separately) is required for unit configuration; module may remain affixed for operational display of input and output values. UL 508 listed and CE marked.
Data Sheet
Price (Ex VAT): 179.39 / 224.09
(4-8 working day delivery)

Quantity:  


Related products:
1. Detachable Programming/Display Module for 884114 and 884116 signal conditioners (Ref: 884501)

 Detachable Programming/Display Module for 884114 and 884116 signal conditioners884501 Detachable Programming/Display Module for 884114 and 884116 signal conditioners
Displays menu-driven configuration parameters, input signal value, engineering units, output signal value and 19 status. Module can be used to transfer/download configuration parameters to multiple signal conditioners. Programming access can be blocked by assigning a password or removing the display module from the signal conditioner. UL508 listed when used with the 884114 or 884116 signal conditioners.
Data Sheet
Price (Ex VAT): 50.03 / 62.50
(4-8 working day delivery)

Quantity:  
spacer