PSM series Slim-Line Metal caseProducts | Power Products (Electrical) | DC Power Supplies | PSM series Slim-Line Metal case 12 VDC and 24 VDC Power Supplies The RHINO PSM series are versatile switching power supplies that come in a rugged DIN-rail mountable, ultracompact metal case made to withstand harsh industrial environments.- The rugged, ultra-compact metal case is shock and vibration resistant to IEC 68-2. The RHINO PSM Series models provide short circuit, overvoltage and overtemperature protection.
- These models accept universal 85-264 VAC input voltage for worldwide use and provide multiple output terminals for easy wiring. Terminal connectors are included.
- RHINO PSM Series power supplies feature a 3 year extended warranty.
|  |
| Regulated switch mode type: | Convection cooling, no internal fan, thermal overload protection | | Universal input 85-264 VAC, 50/60 Hz or 85-375 VDC | Specialty modules for redundancy, power backup and UPS | | Output voltage adjustable - Low ripple and noise | Reliable snap-on DIN-rail mount - Optional wall mounting | | Power good signal - Remote ON/OFF | Full CE compliance including EN61000-3-2 - Industrial approvals: IEC/EN 60950, CSA | | Specialty modules for redundancy, power backup and UPS | Model PSM24-090S-N meets NEC Class 2 Universal 85-264 VAC auto selectable input voltage |
Rhino PSM Specialty Modules- Redundancy Module (PSM-REM360S) - Use two PSM24 power supplies and a redundancy module to configure a redundant power system.
- Battery Control Module (PSM-BCM360S) - Combine with a PSM24 power supply to make a perfect DC-UPS system.
- Buffer Module (PSM24-BFM600S) - Maintains the output voltage of a 24 VDC power supply, after brownouts or voltage dips.
 (1Mb)  (links)
| | | | | | | |  Speciality modulesRedundancy Module (PSM-REM360S) Using two PSM24 power supplies and a redundancy module, you can configure a redundant power system, featuring active current sharing, without any additional components.- Even if one power supply fails or becomes disconnected, the second unit will supply the full current to the load.
- The module has an alarm contact for monitoring of operations. The inputs are hot-swappable and can be loaded up to 15 A each. Terminal plugs are included.
Battery Control Module - PSM-BCM360S The battery control module, when combined with a PSM24 power supply, makes a perfect DC-UPS system by providing the means to charge and monitor an external lead acid battery.- The power supply charges the connected battery and keeps it in charge mode. Consequently, the output voltage of the system is equivalent to the battery voltage.
- To avoid overcharging the battery, an external temperature sensor(sold separately) adjusts the battery voltage automatically to the required end of charge voltage. This configuration extends the battery life.
Buffer Module - PSM24-BFM600S The buffer module will maintain the output voltage of a 24 VDC power supply after brownouts or voltage dips for typically up to 200 ms at 25 amps, or up to 4 seconds at 1.2 Amps.- It is a cost effective alternative to a battery-based backup system.
- The operation modes are indicated by an LED on the front panel. Storing the energy in a capacitor bank, this backup solution is completely maintenance free.
- Its storage capacity does not deteriorate over the lifetime of the unit.
| | | | Mounting BracketsClick on images for more info... | | |
|
