FREE PLC Programming Software

21 easy to use instructions

• The CLICK PLC supports a very simple but practical instruction set.
• The 21 easy-to-use instructions can cover most applications that are suitable for this class of PLC.
• (The CLICK PLC does not support DirectLOGIC Series PLC instructions.)
• View online CLICK software Help files

8,000 steps program memory

• The CLICK CPU module can store up to 8,000 steps (instructions) of ladder program in its flash EEPROM memory.

Decimal memory addressing

• The I/O numbering system is decimal to make it easier to count the number of I/O points and data registers.

Communications

• The powered CLICK CPU module by itself can be used as a complete PLC control system with eight input points and six output points built-in, or the system can be expanded with the addition of up to eight I/O modules.
• A variety of I/O modules are available for flexible and optimal system configuration.

Expandable I/O

• The CPUs have two built-in RS-232 communications ports. One port supports the Modbus RTU protocol only and can be used as the programming part.
• The other port supports either Modbus RTU or ASCII protocol. Both ports supply 5 VDC, so you can connect our C-more Micro-Graphic HMI panel without an additional power supply.

Easy installation

• The CLICK PLC system does not require a mounting base, which saves on space.
• The CLICK CPU and I/O modules are connected together via an integrated expansion port on the sides of the modules and sliding locking tabs on the top and bottom of all modules.