|DL405 Ladder Logic Programmed CPUs|
D4-450 Fixed or Variable Scan The D4-450 CPU provides several scan control options, which are useful in some high-speed machine control applications.
D4-440 CPU The D4-440 provides a subset of the D4-450s capabilities. If you need fast boolean execution, good communications, and complex math or PID isnt required, this is the CPU for you!
D4-430 CPU The D4-430 is the most economical CPU in the DL405 product family. If you are primarily looking at the DL405 because of I/O form factor or reasons that dont require tons of CPU horsepower, try the D4-430.
|DL405 Memory Cartridges|
The D4-440 CPU requires the use of a memory cartridge and the D4-450 CPU can use a memory cartridge instead of its built-in memory if additional program space is needed.
|DL405 Bases & Expansion|
The DL405 product family offers four, six, and eight-slot I/O bases.
The expansion units are only necessary when you want to use local expansion. They are installed in the CPU slot of the expansion bases.
|DL405 AC / DC Input modules|
8-16-32-64 point, 12/24/48 VDC, sink/source.
16 point 1mS response
8-16 pt, 12/24/110 VAC/DC universal inputs.
8-16 pt. 110/220 VAC
|DL405 Serial Remote I/O|
The D4-RS and D4-RSDC Remote I/O Slave Module are placed in remote DL405 bases and attached to the D4-RM master in a daisy-chain formation over a twisted pair communication cable.
|DL405 Ethernet Remote I/O|
The Ethernet Remote Master H4-ERM(-F) connects the DL405 family 430, 440 and 450 CPU systems to slave I/O over a high-speed Ethernet link. Each ERM module can support up to 16 additional H2-EBC systems, 16 Terminator I/O EBC systems, or 16 fully expanded H4-EBC systems. Of course, combinations are fine, too.
|DL405 Communications & Networking|
Choose between the H4-ECOM, H4-ECOM-F and H4-ECOM100 Ethernet communications modules or the D4-DCM serial data communications module.
|DL405 Special modules|
Several specialty modules are available for when your application calls for more than simple I/O control or monitoring.
|Programming software & cables|
The new DirectSOFT5 software package offers a host of advanced features for easier PLC programming.
- Full-featured 32-bit Windows-certified programming for all DirectLOGIC PLCs
- ALL NEW IBox instructions
- FREE version allows a maximum of 100 words for programming, editing, and downloading
|DL405 PLC ZipLinks|
- ZIPLinks eliminate the tedious process of wiring programmable logic controller I/O to terminal blocks
- ZIPLinks use half the space, at a fraction of the total cost of terminal blocks
- ZIPLinks are available for all PLC base units and all discrete input and output modules
|DL405 Spare parts & Accessories|
Everything needed to get and keep a DL305 system up and running.
- Screws, fuses, connectors
- Filler modules, modules covers
- Batteries, cable kits
- Converters, adapters