DL205 Serial Remote I/O
Products | PLC's | DirectLogic PLC's | DirectLogic 205 and WinPLC | DL205 Serial Remote I/O
DL205 PLC - Remote I/O - Serial
With the DirectLOGIC DL205 programmable logic controller (PLC), remote I/O applications are easy to do with remote I/O bases that can be located up to 1,200 meters (at 19.2 K baud) from the local base. We offer both serial and Ethernet Remote I/O master and slave modules. Serial products include those listed below.
Further Information:D2-250-1, and D2-260 DirectLOGIC CPU's include built-in remote I/O master In addition to providing outstanding communications capabilities, the bottom port on the D2-250-1 or D2-260 CPU's can also act as a master for remote I/O networks. If you need extra I/O at a remote distance from the CPU, you can use this port to add up to seven of our remote DL205 base or Terminator I/O slave stations. |  |
|
See Terminator I/O for the full Remote I/O System product range
|
| Note: Manuals do not come with our products unless specified in the description. Download manual from our web site at no charge, or order manual separately.Note: New option modules may not be supported by CPUs purchased prior to the modules release. You can refer to the module specification page on our Web site for this information or find it in our catalog. Be sure to check for the latest firmware for your PLC. Here is the direct link to the Firmware Upgrade section of our Web site where you can find the firmware revision histories, the latest files and tools required to download the firmware into your CPU.Note: Power budget limitations restrict the number of modules allowed in the slots of DL205 bases. Please consult the power budgeting tables in your manual or catalogue for specific calculations. Calculate the power budget |
|
|
Products | PLC's | DirectLogic PLC's | DirectLogic 205 and WinPLC | DL205 Serial Remote I/O
