View Cart Checkout

Products | PLC's | CTI-2500 System | CTI-2500 Series® PLC |  Remote Base Controllers

Remote Base Controllers

Sub Sections - 2500 Series® PLC:
Processors | I/O Adapters | Rack Power Supplies | I/O Bases | Remote Base Controllers | Digital I/O | Analogue I/O | Temperature Inputs | Relay Outputs | Communications | Special Modules | Software
PRICES AVAILABLE ON REQUEST - CALL 01737 824600

Profibus-DP Remote Base ControllerCTI-2500-RBC Profibus-DP Remote Base Controller
The 2500-RBC Profibus Remote Base Controller (RBC) allows a CTI 2500 Series or Simatic® 505 I/O base to function as a slave node on a DP I/O channel that complies with the PROFIBUS standard. The Remote Base Controller is a direct replacement for the Siemens® 505-6870 RBC. Note that the 2500-RBC does not provide for programming the PLC over its serial port. (Ref: CTI-2500-RBC)

Features:
  • Replaces Siemens® 505-6870; compatible with Siemens® S5 and S7 as well as Series 505 masters
  • Can be used in all currently available CTI and Siemens® 4, 8, and 16 slot bases
  • Supports communication speeds from 9.6 Kbaud (maximum cable distance per segment: 1200 m) up to 12 Mbaud (maximum cable distance per segment: 100m)
  • Supports all CTI and Siemens® discrete and analog I/O modules
  • GSD file is provided with the RBC to allow configuration by the COM PROFI
  • LED display for error codes and station address
Documentation
data sheet
(5-10 working day delivery)

Quantity:  

RS485 Remote Base ControllerCTI-2500-RIO-A RS485 Remote Base Controller
The 2500-RIO RS485 Remote Base Controller allows control of a remotely-located CTI 2500 Series or Simatic® 505 I/O base over a twisted-pair RS485 cable up to 1000m from the CPU. (Ref: CTI-2500-RIO-A)

Features:
  • Replaces Siemens® 505-6851-A and 505-6851-B with no rewiring
  • Can be used in all currently available CTI and Siemens 4, 8, and 16-slot bases
  • Up to 15 remote bases can be attached to a CPU
  • Maximum cable distance between CPU and remote base is 1000m
Documentation
data sheet
(5-10 working day delivery)

Quantity:  

RS485 remote I/O tap.CTI-2500-TAP RS485 remote I/O tap.
For attaching trunkline and dropline sections to create 2500 Series remote I/O networks. An impedance-controlled design for highest noise immunity with built-in switchable termination resistance, and an electrical noise bleed path to chassis ground to improve noise immunity of network. Ref: CTI-1500-TAP)

Features:
  • dust and water resistant installation
  • impedance controlled design
  • built in terminating resistance
  • electrical noise bleed system for improved noise immunity

data sheet
(5-10 working day delivery)

Quantity:  

Products | PLC's | CTI-2500 System | CTI-2500 Series® PLC |  Remote Base Controllers

spacer
  • Lamonde Automation Ltd.
  • Project House, Morris Road
  • South Nutfield, Surrey
  • RH1 5SA, United Kingdom
  • Tel: +44 (0)1737 824600
  • Fax: +44 (0)1737 821431
  • sales@lamonde.com

© 2011 - 2013 Lamonde Automation Ltd.