Features

• 32-bit RISC Processor - Touch the screen and you can feel the power of the fastest RISC-processor used in any touch-screen on the market.The EasyView MT8000 series offers high performance features for the Industrial Environment. Even the most complicated graphics can be called up in a snap, without waiting for a slow operating system like WindowsCE to load and respond.
• Bright High-Resolution Colour TFT display - 65,536 (16-bit) TFT colour displays provide finer lines and vivid colours, with fast and smooth screen changes without flashing. Clearly exhibit your images, text and dynamic GIF files.
• SD Card - A standard SD card slot (CF card in "T" series) is provided to improve effiency when using recipe files, data logging and project changes, as well as to simplfy data processing.
• EtherNet - The MT8000 series supports devices such as Allen-Bradley, Siemens, Koyo DirectLogic, LS, Mitsubishi, Omron, Yokogawa and generic Modbus TCP/IP PLC's which offer EtherNet/IP connection, which allows users to integrate multiple PLC's and panels into a high speed network, with greater data throughput and higher security.
• High-Reliability Touch Panel - An industrial grade analogue resistive touch screen is a feature of all EasyView panels that provide infinite touch resolution. They are protected by a very hard coating for long life and reliability.
• High Speed USB 2.0 client and USB 1.1 host Interfaces - provide for easy project up/down load, and data storage plus connection to printer, bar code reader, mouse/tracker ball and a variety of USB devices. (2x USB 2.0 only for "T" series)
• Serial Interface - Each HMI panel is equiped with three serial ports (one port only on MT6050i), which can drive up to 3 PLC's, controllers or networks simultaneously via a combination of RS232/485 2/4-wire. (RS232 printers also supported).
• Sound Output - Send out audible alarms to an amplifier/speaker combination to alert operators to screen alarms (selected models).
• NEW MT-8000X / XH series based on X86 Processor provides remote Virtual Terminal support ("i" series also).

Multiple MT8000 HMIs and/or PLCs

Can be connected as an Ethernet 10/100 base-T network, allowing several MT8000's on the network to exchange data at high speed.
One MT8000 can then access data from any other MT8000, and new projects, recipies, settings or data can be quickly downloaded.
In recent years related technologies within manufacturing have evolved and improved, and the automation and control industries have become heavily involved in networking at all levels. The MT8000 series has been developed around this new technology to provide the benefits of shorter response time, greater data throughput and higher security than other protocols based on Industrial Ethernet.

The following protocols are supported, and all drivers are included within EasyBuilder

The following protocols are supported, and all drivers are included within EasyView

DirectLOGIC - DirectNET, K-Sequence (Koyo / AutomationDirect) Allen Bradley - DF1, DH485, Compact/Control/FlexLogix, EtherNet/IP Barcode, ASCII server, Baumuller, Copley, CTI-2500 series Danfoss - VLT2800 series, Delta - DVP Emerson - PLC EC20, Fatek - FB series, Heng Yuang sensor GE Fanuc - SNP-X, Hitachi - H series, IDEC - Micro Keyance - KV-16, Lenze LS Glofa Cnet, Master-K Cnet, Master-K300S CPU Matsushita - FP, Memobus (Yaskawa), Metronix AnyPack (MECAPION) Mitsubishi - AJ71, FX series, 485BD, Q02H, Q06H, QJ71 Modbus - ASCII, RTU, Server, EtherNet TCP/IP Omron - C/CQM1 series, CJ1, CS1, E5CN Siemens - S7-200, S7-300, Ethernet, SIMATIC® 505® Telemecanique - UniTelway, Texas Instruments - TI 505, Toshiba - VF-S11 Vigor, Oemax, Panasonic, Parker, Provisor, SAIA, SEW, Vigor, Yokogawa